One easy method to increase your Wi-Fi connection and get rid of dead zones is to set up a Belkin Range Extender. For easily executing Belkin Range Extender Setup, follow these instructions.
1. Connect the extension
- A power outlet close to your router is where you should connect your Belkin range
- extender. Hold off until the power LED solidifies.
2. Attach the Extender
- Navigate to the Wi-Fi settings on your computer or smartphone and join the Belkin.setup network.
3. Go to the Configuration Page
- Enter “http://belkin.range” in the address bar of a web browser. You will be directed to the setup wizard as a result.
4: Select Your Network
- From the list, pick your current Wi-Fi network and type in its password. To continue, click Next.
5: Set Up and Complete
- Configure your password and extended network name (SSID). Wait for the extender to restart after verifying the settings.
6. Check the Connection:
- Unplug Belkin.Set up your new extended network and connect to it. Make sure the signal is stronger for your devices.
Troubleshooting Advice:
- Try 192.168.206.1 if you are unable to visit http://belkin.range.
- Holding down the reset button for ten seconds will reset the extender.
- Position the extension halfway between locations with poor signal strength and your router.
Visit our website to know more.
Belkin Range Extender Setup 
Leave a comment